i have a mustang and was wondering how much it is to have a chrome paint job done on it and where in providence do i go to get itHow much is it to have a chrome paint job done on a mustang?
For one i think it would be illegal to drive on a street with that since you would blind people. but otherwise it would be hella expensive and a huge pita to keep clean and not to mention it would look stupidHow much is it to have a chrome paint job done on a mustang?
Oooooh... that'll be classy...
Tuesday, March 16, 2010
How much would a professional painter cost to paint the inside of a house?
thanksHow much would a professional painter cost to paint the inside of a house?
Between $200 and $10,000. What kind of shape are the walls in? What colors are the walls, and what colors will they be painted? When is the last time they were painted? How big is your house? One or two story? How much furniture needs to be moved? Where do you live? What kind of paint is the painter using? All of these questions affect the cost of the project. Your best bet is to have several painters give you an estimate. Be sure to compare the bids closely. A painter using Glidden will cost less than one using Benjamin Moore, but you'll get a MUCH better job with Moore. Hope this helps.How much would a professional painter cost to paint the inside of a house?
Hmm, a smart and logical action to take would be to get free estimates from local painting contractors in your area who could provide you information on the cost of painting your house to your desire. Because the cost of labor varies by location, it is wise not to rely on estimates found here on Yah.
Hmm, here is a handyman site that I came across, which has a section dedicated to walls and painting, where you'll find a text-link ad that offers up to four (4) Free Estimates from such local painting contractors in your area (scroll down a bit and it's the text-link towards the middle of the page):
http://yourhandymanzone.com/Your_Handyma鈥?/a>
Click on the ';Find Local Painting Services. Get Up to 4 Quotes Free'; text link. Guessing on here is not as productive as getting a quote upon which you can rely. Trust me, from general experience, you'll be glad that you got concrete estimates.
it really depends on a number of factors like what kind of prep work is required, patch holes, different color trim/celings, amount of trim. for a professional maybe around $2 per square footage of your home.
Between $200 and $10,000. What kind of shape are the walls in? What colors are the walls, and what colors will they be painted? When is the last time they were painted? How big is your house? One or two story? How much furniture needs to be moved? Where do you live? What kind of paint is the painter using? All of these questions affect the cost of the project. Your best bet is to have several painters give you an estimate. Be sure to compare the bids closely. A painter using Glidden will cost less than one using Benjamin Moore, but you'll get a MUCH better job with Moore. Hope this helps.How much would a professional painter cost to paint the inside of a house?
Hmm, a smart and logical action to take would be to get free estimates from local painting contractors in your area who could provide you information on the cost of painting your house to your desire. Because the cost of labor varies by location, it is wise not to rely on estimates found here on Yah.
Hmm, here is a handyman site that I came across, which has a section dedicated to walls and painting, where you'll find a text-link ad that offers up to four (4) Free Estimates from such local painting contractors in your area (scroll down a bit and it's the text-link towards the middle of the page):
http://yourhandymanzone.com/Your_Handyma鈥?/a>
Click on the ';Find Local Painting Services. Get Up to 4 Quotes Free'; text link. Guessing on here is not as productive as getting a quote upon which you can rely. Trust me, from general experience, you'll be glad that you got concrete estimates.
it really depends on a number of factors like what kind of prep work is required, patch holes, different color trim/celings, amount of trim. for a professional maybe around $2 per square footage of your home.
How to make the background and inside the object transparant on paint?
You can't. If you want to, email it to me, and I'll do it.lipstick
How to apply paint on metal?can gloss paint be used for it?
You must first use a metal primer.Then you can put gloss paint over it.
I wish you had said what you are painting.You can use ';Rustoleum';Primer and finish coat for almost anything.I wouldn't use water base paint for metal.9/21How to apply paint on metal?can gloss paint be used for it?
What are you painting? Is it indoor or outdoor? Indoor, you can use eggshell [ sort of satin finish] on radiators, as well as the various gloss paints. Make sure you rub off all loose paint and give a primer coat if the item hasn''t been painted before.
Outdoors, for things like decorative lamp posts, gates, garden furniture, I always find Hammerite paint the best. Again , good prep is essential. If you are painting aluminium garden furniture, you need a special red coloured primer first as ordinary primer doesn't seem to work.
Whatever it is go to you nearest B%26amp;Q/ Home Depot and ask advise, the folk there will give you good advice.How to apply paint on metal?can gloss paint be used for it?
If the metal is already painted, then you paint it the same way and with the same paint as you would for wood. One undercoat and then one gloss.
If the metal is bare then it needs to be primed. If the metal is ferrous (iron based) then you use red oxide primer. If it is non ferrous( galvanaised, aluminium, zinc) then an etching primer is required. Then you paint as you would, wood.
hey there, i'm a painter and decorator.... it would help if you said what kind of metal you are painting! if it is your normal out door railings you can use normal undercoat then gloss, if it is new railings and are galvanised steel you must give them a coat of T-wash either that the paint with flake of in a matter of months! if if is lead you can use hammerite.... one more thing.... make sure all surfaces are rubbed down and all rust is scraped and dusted down well before you apply paint.... gd luck
First clean up the surface and make it rust free, then apply metallic primer, let it dry then go for any enamel of any type of metallic paint. yes you can find many types of glossy paints in market for metal.
yes you can,make sure surface is rust free,you can get gloss paint that tells you on the can wether its for metal or wood,or for both metal and wood.like dulux or hammerite.
Use Hammerite. No primer needed, except on galvanised or aluminium. You can even paint directly onto rust, provided it isn't loose or flaking. Stocked by Halfords, Brewers or any Paint Store.
Yes you can use regular gloss paint on metal although if possible apply with a small foam roller and maybe give it a second coat after.
I wish you had said what you are painting.You can use ';Rustoleum';Primer and finish coat for almost anything.I wouldn't use water base paint for metal.9/21How to apply paint on metal?can gloss paint be used for it?
What are you painting? Is it indoor or outdoor? Indoor, you can use eggshell [ sort of satin finish] on radiators, as well as the various gloss paints. Make sure you rub off all loose paint and give a primer coat if the item hasn''t been painted before.
Outdoors, for things like decorative lamp posts, gates, garden furniture, I always find Hammerite paint the best. Again , good prep is essential. If you are painting aluminium garden furniture, you need a special red coloured primer first as ordinary primer doesn't seem to work.
Whatever it is go to you nearest B%26amp;Q/ Home Depot and ask advise, the folk there will give you good advice.How to apply paint on metal?can gloss paint be used for it?
If the metal is already painted, then you paint it the same way and with the same paint as you would for wood. One undercoat and then one gloss.
If the metal is bare then it needs to be primed. If the metal is ferrous (iron based) then you use red oxide primer. If it is non ferrous( galvanaised, aluminium, zinc) then an etching primer is required. Then you paint as you would, wood.
hey there, i'm a painter and decorator.... it would help if you said what kind of metal you are painting! if it is your normal out door railings you can use normal undercoat then gloss, if it is new railings and are galvanised steel you must give them a coat of T-wash either that the paint with flake of in a matter of months! if if is lead you can use hammerite.... one more thing.... make sure all surfaces are rubbed down and all rust is scraped and dusted down well before you apply paint.... gd luck
First clean up the surface and make it rust free, then apply metallic primer, let it dry then go for any enamel of any type of metallic paint. yes you can find many types of glossy paints in market for metal.
yes you can,make sure surface is rust free,you can get gloss paint that tells you on the can wether its for metal or wood,or for both metal and wood.like dulux or hammerite.
Use Hammerite. No primer needed, except on galvanised or aluminium. You can even paint directly onto rust, provided it isn't loose or flaking. Stocked by Halfords, Brewers or any Paint Store.
Yes you can use regular gloss paint on metal although if possible apply with a small foam roller and maybe give it a second coat after.
How does the painting The Persistence of Memory relate to imaginative journeys?
how does the painting relate to imaginative journeys, coleridge's poems and the film the wizard of oz?How does the painting The Persistence of Memory relate to imaginative journeys?
Because all were done under the influence of hallucinogens. Kublai Khan, Alice in wonderland are a few more as well.
Because all were done under the influence of hallucinogens. Kublai Khan, Alice in wonderland are a few more as well.
How to paint this car?
Can anyone tell from the picture whats went wrong with the paint and how to fix it by myself. My car exactly looks the same.
http://www.mitsubishipaintproblems.com/?page_id=85How to paint this car?
The clear coat has baked off from the sun. I would buff off whats left of the clear coat and get a couple rattle cans of clear coat n spray itHow to paint this car?
your clear coat part of the paint job has died. That is what you are seeing. The EPA has made it hard for folks at home to do a repaint that uses this process. Look for a MACCO or Earl Schib paint place and consult them.
(Yes I know you are Not in EPA territory, BUT the car makers have adapted the EPA standards so you are stuck with the type of paint they used to paint the car)
The clear coat has peeled off of the car. You would need to sand off the remaining clear coat and then scuff up the paint with a scuff pad then reclear it.
I'd bring it to a shop
Give a blue under coat with a flame over coat
that would come out muh better
http://www.mitsubishipaintproblems.com/?page_id=85How to paint this car?
The clear coat has baked off from the sun. I would buff off whats left of the clear coat and get a couple rattle cans of clear coat n spray itHow to paint this car?
your clear coat part of the paint job has died. That is what you are seeing. The EPA has made it hard for folks at home to do a repaint that uses this process. Look for a MACCO or Earl Schib paint place and consult them.
(Yes I know you are Not in EPA territory, BUT the car makers have adapted the EPA standards so you are stuck with the type of paint they used to paint the car)
The clear coat has peeled off of the car. You would need to sand off the remaining clear coat and then scuff up the paint with a scuff pad then reclear it.
I'd bring it to a shop
Give a blue under coat with a flame over coat
that would come out muh better
If I were to mix paint how would I get the skin color of Captain K'nuckles from Flapjack?
In my art class at school we have to trace a picture and paint with as close to the color as possible. I'm doing the Captain from the Marvelous Misadventures of Flapjack. However, I just can't quite get his skin color right. I've tried a bunch of blue-green combinations with varied degrees of white and/or black. The results have been close though not quite the color I'm looking for. My teacher said its looking close enough but that's not gonna stop it from bothering me xD
Any ideas? It's like there's a strong hint of green in a tinted blue, but anytime I add a little more green it comes out too green (and taking away too much green makes it not green enough if that makes sense)If I were to mix paint how would I get the skin color of Captain K'nuckles from Flapjack?
you should add gray, blue, and only a little green together.
Any ideas? It's like there's a strong hint of green in a tinted blue, but anytime I add a little more green it comes out too green (and taking away too much green makes it not green enough if that makes sense)If I were to mix paint how would I get the skin color of Captain K'nuckles from Flapjack?
you should add gray, blue, and only a little green together.
How to take decals off the car window & car paint??
i have 2 decals i'd like to remove from my car. one is a sticker on the paint part of my car (right above the silver bumper, next to the word ';explorer'; on my ford explorer) and one that is a window decal that is applied directly on the window from the outside. is there a safe way i can take these off without harming the window??? please help!!!How to take decals off the car window %26amp; car paint??
The window sticker can be safely removed with razor blade or razor scraper. If there's some gummy glue residue left use Goo gone which Walmart sells. On the paint try heating it with a hair dryer and peeling it off with your fingers. Easy with the hair dryer. Goo gone also works here on glue residue.How to take decals off the car window %26amp; car paint??
I learned this from a professional, and have done it this way at work. Heat the sticker with a heat gun or a blow drier set to HEAT. If you have a plastic putty knife, this next part won't burn your fingers. Start to peel one corner of the sticker while applying heat. Grab the piece of the sticker that is loose, and gently pull while applying heat. You can use tweezers or pliers to pull the sticker if it's too hot on your fingers. If the whole sticker did not come off, use a plastic putty knife with the heat to gently scrape the rest off. Once the sticker is off, Goo-Gone, Goof-Off, or almost any citrus based solvent will remove the rest of the glue. Then, to remove the solvent, clean with Windex or any ammonia based window cleaner. The area under the sticker that was on the painted surface may have to be buffed out with polishing compound, but you can try a little tooth paste on a cotton rag to buff it out.
P.S. DO NOT USE A RAZOR BLADE. It WILL scratch glass.
TMFI? I hope not. Good luck.
Heat the stickers w/a blow dryer they'll usually come off. Or soak them well w/soap and water.
The professionals use a rubber eraser wheel attached to a drill. They work amazingly well.
There is a product called Sticker Shock - I bought some at a Napa auto parts store it seems to work pretty well and is paint safe. It softens the adhesive and the stickers will peel off.
The window is the easiest. Just use a razor blade, and scrape it off - you will not hurt the glass. Use wd40 or nail polish remover on a rag to get the glue off the window if there is any left over. You could also use a paint stripper or thinner like turpentine.
The painted surface, you can try peeling as much as you can with your finger nail, then use wd40 on a rag to get the glue off. Don't use any strong solvents, they may take the paint off. A hot blowdryer can help peel this one away too.
all you have to do is take a heat gun or a blowdryer will work just as good, it will just take a little longer. Just heat till the glue gets warm and the sticker should just come right off
yup. heat gun or blow dryer will work... for the one on the window you can use a razor blade without hurting the glass, as long as it is on the outside and not tinted...
The window sticker can be safely removed with razor blade or razor scraper. If there's some gummy glue residue left use Goo gone which Walmart sells. On the paint try heating it with a hair dryer and peeling it off with your fingers. Easy with the hair dryer. Goo gone also works here on glue residue.How to take decals off the car window %26amp; car paint??
I learned this from a professional, and have done it this way at work. Heat the sticker with a heat gun or a blow drier set to HEAT. If you have a plastic putty knife, this next part won't burn your fingers. Start to peel one corner of the sticker while applying heat. Grab the piece of the sticker that is loose, and gently pull while applying heat. You can use tweezers or pliers to pull the sticker if it's too hot on your fingers. If the whole sticker did not come off, use a plastic putty knife with the heat to gently scrape the rest off. Once the sticker is off, Goo-Gone, Goof-Off, or almost any citrus based solvent will remove the rest of the glue. Then, to remove the solvent, clean with Windex or any ammonia based window cleaner. The area under the sticker that was on the painted surface may have to be buffed out with polishing compound, but you can try a little tooth paste on a cotton rag to buff it out.
P.S. DO NOT USE A RAZOR BLADE. It WILL scratch glass.
TMFI? I hope not. Good luck.
Heat the stickers w/a blow dryer they'll usually come off. Or soak them well w/soap and water.
The professionals use a rubber eraser wheel attached to a drill. They work amazingly well.
There is a product called Sticker Shock - I bought some at a Napa auto parts store it seems to work pretty well and is paint safe. It softens the adhesive and the stickers will peel off.
The window is the easiest. Just use a razor blade, and scrape it off - you will not hurt the glass. Use wd40 or nail polish remover on a rag to get the glue off the window if there is any left over. You could also use a paint stripper or thinner like turpentine.
The painted surface, you can try peeling as much as you can with your finger nail, then use wd40 on a rag to get the glue off. Don't use any strong solvents, they may take the paint off. A hot blowdryer can help peel this one away too.
all you have to do is take a heat gun or a blowdryer will work just as good, it will just take a little longer. Just heat till the glue gets warm and the sticker should just come right off
yup. heat gun or blow dryer will work... for the one on the window you can use a razor blade without hurting the glass, as long as it is on the outside and not tinted...
How do i transfer Krylon spray paint to an empty walmart can?
It would be unsafe, and likely criminal.How do i transfer Krylon spray paint to an empty walmart can?
You cannot transfer spray paint from one can to another one.
How do i transfer Krylon spray paint to an empty walmart can?
why and no
It can not be done ;(lipstick
You cannot transfer spray paint from one can to another one.
How do i transfer Krylon spray paint to an empty walmart can?
why and no
It can not be done ;(
How much does it cost to custom paint a jeep wrangler?
I suppose it depends upon how much detail you want in your custom paint job. You can get a simple and good-quality, one color re-paint of your entire car for around $800. If you wanted to do something like Zebra or Tiger Stripes, then you might pay nearly $3,000. If you wanted REALLY detailed and VERY realistic looking Tiger Stripes with all the proper shading and coloring like real fur, then you might pay $5,000 or more.How much does it cost to custom paint a jeep wrangler?
$20 for a few cans of spray paint, or $10,000 for a high quality custom job from a shop that specializes in custom work. Or anything in between.
$20 for a few cans of spray paint, or $10,000 for a high quality custom job from a shop that specializes in custom work. Or anything in between.
How to make and RPC with Paint.Net?
My problem,more than anything,is color. I can make a new layer,and outline it,but what do you do after that?Like,how do you change hair/clothes color and hair style? A video would be cool,but please don't use time lapse....time lapse is confusing, I need a step-by-step tutorial. Thanks in advance. =DHow to make and RPC with Paint.Net?
check the video tutorial about RPC and paint.net
http://www.youtube.com/watch?v=qCV_32yhT鈥?/a>
check the video tutorial about RPC and paint.net
http://www.youtube.com/watch?v=qCV_32yhT鈥?/a>
How to remove spray paint from airsoft gun?
im using alcohol right now but its ony removing part of it and very slowHow to remove spray paint from airsoft gun?
scrub it with a hard sponge oh and by the way oil based paint is harder to remove than water basedHow to remove spray paint from airsoft gun?
Hello.
Hope you are fine.
Remove Orange Tips
Before you head out to a major airsoft event, you may want to remove orange tips from your airsoft guns. Removing orange will help you blend into the environment more, and make your gun look much better.
There are several different methods you can use when you decide to remove orange tips.
You can Goo Gone to remove orange tips from your airsoft rifles. This method is only effective if there is black under the orange paint. This process of removing orange takes quite a bit of work, but the end result is fantastic. Classic Army airsoft rifles usually work well with this method of removing orange airsoft tips.
First of all, remove the flashhider from the airsoft gun, and set it on a paper plate. Purchase some Goo Gone, which is a paint remover. Get some Q-tips and paper towel ready, and begin scrubbing the orange tip with soaked paper towel. It will take quite a bit of time to remove the orange with this method. The Goo Gone needs to soak into the orange before it can be removed.
For those tips that do not work with Goo Gone, the next solution to remove orange from tips is to spray paint. Find black spray paint with a texture similar to the rest of your gun. Remove the orange tip from the gun, and place it upright on a piece of cardboard outside. Steady it vertically with a nail through the cardboard if needed. Do quick, short sprays on the flashhider until the orange is covered. Give it at least 2-3 coats of black paint to completely remove orange from tips. Let the paint dry 1 hour before touching it.
If you can't remove the flashhider from the gun, you have to take precautions to covering the gun from paint when you remove orange from tips. Use tape to cover the barrel of the gun, all the way up to the edge of the orange flashhider. Push a piece of cardboard over the barrel so that it protects the rest of the gun from the spray paint while you remove orange.
Then, carefully fill the inside of the barrel with paper to prevent paint from getting on the barrel. Be sure there are no ways paint can get inside the barrel, and begin spray painting. Don't apply the paint thickly, so that the paint does not run inside the barrel at all.
So hope you like it. Thank you.
they got some stuff call spray gun cleaner its like alcohol x10 stuff is potent and flammable most car paint and auto retailers should have it
i was ganna say alcohol but yea i just now read what ur doing lol
use axe spray
steel wool of course, that is my 5 minute fix for today
scrub it with a hard sponge oh and by the way oil based paint is harder to remove than water basedHow to remove spray paint from airsoft gun?
Hello.
Hope you are fine.
Remove Orange Tips
Before you head out to a major airsoft event, you may want to remove orange tips from your airsoft guns. Removing orange will help you blend into the environment more, and make your gun look much better.
There are several different methods you can use when you decide to remove orange tips.
You can Goo Gone to remove orange tips from your airsoft rifles. This method is only effective if there is black under the orange paint. This process of removing orange takes quite a bit of work, but the end result is fantastic. Classic Army airsoft rifles usually work well with this method of removing orange airsoft tips.
First of all, remove the flashhider from the airsoft gun, and set it on a paper plate. Purchase some Goo Gone, which is a paint remover. Get some Q-tips and paper towel ready, and begin scrubbing the orange tip with soaked paper towel. It will take quite a bit of time to remove the orange with this method. The Goo Gone needs to soak into the orange before it can be removed.
For those tips that do not work with Goo Gone, the next solution to remove orange from tips is to spray paint. Find black spray paint with a texture similar to the rest of your gun. Remove the orange tip from the gun, and place it upright on a piece of cardboard outside. Steady it vertically with a nail through the cardboard if needed. Do quick, short sprays on the flashhider until the orange is covered. Give it at least 2-3 coats of black paint to completely remove orange from tips. Let the paint dry 1 hour before touching it.
If you can't remove the flashhider from the gun, you have to take precautions to covering the gun from paint when you remove orange from tips. Use tape to cover the barrel of the gun, all the way up to the edge of the orange flashhider. Push a piece of cardboard over the barrel so that it protects the rest of the gun from the spray paint while you remove orange.
Then, carefully fill the inside of the barrel with paper to prevent paint from getting on the barrel. Be sure there are no ways paint can get inside the barrel, and begin spray painting. Don't apply the paint thickly, so that the paint does not run inside the barrel at all.
So hope you like it. Thank you.
they got some stuff call spray gun cleaner its like alcohol x10 stuff is potent and flammable most car paint and auto retailers should have it
i was ganna say alcohol but yea i just now read what ur doing lol
use axe spray
steel wool of course, that is my 5 minute fix for today
I have used oil paint for my flat, please tell let me know how to get rid of the smell?
i have two kids and i am scared that they will catch cold coz of the smellI have used oil paint for my flat, please tell let me know how to get rid of the smell?
move outside or wait i think thats all you can do i painted a piece of furniture and it took weeks to get rid of the smellI have used oil paint for my flat, please tell let me know how to get rid of the smell?
Open a window or two
move outside or wait i think thats all you can do i painted a piece of furniture and it took weeks to get rid of the smellI have used oil paint for my flat, please tell let me know how to get rid of the smell?
Open a window or two
My cat is covered in paint! how to remove?!?
HELP! we're having our guest room painted, and my three month old kitten just jumped in the bucket!! Does anyone know how to remove paint from her fur without harming her skin or health!? I have regular kitten shampoo but before i put her in the water, i wanna hear what you guys might suggest?! PLEASE HELP!!My cat is covered in paint! how to remove?!?
shave the cat ,no seriously if the paint is water based just wash the cat with water and it should come out.My cat is covered in paint! how to remove?!?
I'm going to assume the paint is water based. If so, shampoo should work but depending on the color of the paint, your kitten may take some time to get back it's natural color. If oil based I would not recomment gasoline or turpentine since the fumes could be harmful to you both. Call your vet - I'm sure this may be a first and will become a popular lunchroom topic!
Also, bless your kitten's little heart for giving me quite the laugh. I just had to have my companion of 17 1/2 years euthanized and have been crying pretty much non-stop for 2 days. Marty was quite the prankster but he never jumped into a paint can! I would suggest you begin a ';Marely %26amp; Me'; type journal for your little kitten, with a start like that you've got lots of joys ahead in the years!
i was painting our porch ealier this year and my cat skye was watching near me an a blob on paint fell on her an she licked it off i gave her lots of fresh water and got the rest of with my hands and tissue and she was fine. i kept an eye on her that day though. if i was you id plonk her in the sink and rinse her off maybe with a tiny bit of shampoo and dont let her lick it and maybe itd be a good idea to phone the vet, just to see what they say. hope this helps
Call the emergecy vet now! I'm serious. Most paint today is not toxic, but it depends on how much paint is on the kitten! The vet will tell you what you can use or do now.
Whatever you do, do NOT allow her to be licking her fur. I sure hope its not a lot of paint on her.
I would say get some gasoline on a rag and wipe her off, but since you say she jumped into the bucket, bathing it in soap and water would probably be best.
Get pet shampoo and wash until the paint come out. while your washing your cat, close all of the doors, so your cat can't get away from the water. Hope I helped! :D
Water and shampoo. I would also put in a call to your vet. At this point your cat has probably ingested some of the paint.
First of all call your vet and ask them what to do. But do NOT let her lick herself because the paint might be toxic. Hope I helped some :)
Dawn dish soap. They use this to clean duck and birds who are coated with oil from Oil spills.
shave the cat ,no seriously if the paint is water based just wash the cat with water and it should come out.My cat is covered in paint! how to remove?!?
I'm going to assume the paint is water based. If so, shampoo should work but depending on the color of the paint, your kitten may take some time to get back it's natural color. If oil based I would not recomment gasoline or turpentine since the fumes could be harmful to you both. Call your vet - I'm sure this may be a first and will become a popular lunchroom topic!
Also, bless your kitten's little heart for giving me quite the laugh. I just had to have my companion of 17 1/2 years euthanized and have been crying pretty much non-stop for 2 days. Marty was quite the prankster but he never jumped into a paint can! I would suggest you begin a ';Marely %26amp; Me'; type journal for your little kitten, with a start like that you've got lots of joys ahead in the years!
i was painting our porch ealier this year and my cat skye was watching near me an a blob on paint fell on her an she licked it off i gave her lots of fresh water and got the rest of with my hands and tissue and she was fine. i kept an eye on her that day though. if i was you id plonk her in the sink and rinse her off maybe with a tiny bit of shampoo and dont let her lick it and maybe itd be a good idea to phone the vet, just to see what they say. hope this helps
Call the emergecy vet now! I'm serious. Most paint today is not toxic, but it depends on how much paint is on the kitten! The vet will tell you what you can use or do now.
Whatever you do, do NOT allow her to be licking her fur. I sure hope its not a lot of paint on her.
I would say get some gasoline on a rag and wipe her off, but since you say she jumped into the bucket, bathing it in soap and water would probably be best.
Get pet shampoo and wash until the paint come out. while your washing your cat, close all of the doors, so your cat can't get away from the water. Hope I helped! :D
Water and shampoo. I would also put in a call to your vet. At this point your cat has probably ingested some of the paint.
First of all call your vet and ask them what to do. But do NOT let her lick herself because the paint might be toxic. Hope I helped some :)
Dawn dish soap. They use this to clean duck and birds who are coated with oil from Oil spills.
How much does it cost to custon paint a honda ridgeline?
You could go to Maaco to get a basic paint job for under $1k. A decent paint job where they spray the jambs and engine bay will cost any where from $3-5,000. Custom paint jobs will be more than that.How much does it cost to custon paint a honda ridgeline?
Good god don't go to Maaco (or Earl Scheib, or One Day). You will regret it after a year.
A GOOD paint job for a larger passenger vehicle would run about $4000+
Don't go cheap. You'll be paying a lot more to have the bad paint job removed.How much does it cost to custon paint a honda ridgeline?
Depends on the type of paint job. The average seems to be $3000 for a newer vehicle. If you are wanting pearlescent or a two-tone, you are going to shell out a few thousand more.
you might be able to find someone here that can help you http://www.ridgelineownersclub.com/forum鈥?/a>
there are some people that put some kinda vinyl wrap on theres, someone bought theres already custom painted, with a custom sound system and airbag suspention
close your eyes and spray itlipstick
Good god don't go to Maaco (or Earl Scheib, or One Day). You will regret it after a year.
A GOOD paint job for a larger passenger vehicle would run about $4000+
Don't go cheap. You'll be paying a lot more to have the bad paint job removed.How much does it cost to custon paint a honda ridgeline?
Depends on the type of paint job. The average seems to be $3000 for a newer vehicle. If you are wanting pearlescent or a two-tone, you are going to shell out a few thousand more.
you might be able to find someone here that can help you http://www.ridgelineownersclub.com/forum鈥?/a>
there are some people that put some kinda vinyl wrap on theres, someone bought theres already custom painted, with a custom sound system and airbag suspention
close your eyes and spray it
How to make red paint..?
How can you make red paint with;; orange, yellow, brown, green and blue acrilyc paint?How to make red paint..?
I dunno if ya can make red paint...I can't think of any colours that would make it! I know you could use orange but i don't know what you could mix it with... Try it wit blue and see what happens but it could be a disaster!!How to make red paint..?
your going to have to buy red paint, it is a primary color so you can't combine colors to create red.
Printers make Red by combining Yellow and Magenta (called process blue) in equal proportion. These are transparent color inks. Acrylics would be non-transparent, solid colors. Your primary colors are then Red, Yellow and Blue. From these you make the other colors. You cannot make Red this way.
I dunno if ya can make red paint...I can't think of any colours that would make it! I know you could use orange but i don't know what you could mix it with... Try it wit blue and see what happens but it could be a disaster!!How to make red paint..?
your going to have to buy red paint, it is a primary color so you can't combine colors to create red.
Printers make Red by combining Yellow and Magenta (called process blue) in equal proportion. These are transparent color inks. Acrylics would be non-transparent, solid colors. Your primary colors are then Red, Yellow and Blue. From these you make the other colors. You cannot make Red this way.
How many babies does it take to paint a house? Depends how hard you throw them.?
I hope you mean Jelly Babies!!
lolHow many babies does it take to paint a house? Depends how hard you throw them.?
Depends how fat they are! Obesity rules because then you wont need as many but you'd better be carefull that your house doesnt fall down!How many babies does it take to paint a house? Depends how hard you throw them.?
well done but i would agree age and size would also play a factor if you were gioing to try it.
hahhahahahahahahahaha
we love the sicko's on this site so the rest of you
back to your knitting page
526
You are either an idiot or you're very immature,then again you might be a real sick-o, but You're free to be stupid on line or anywhere else you might be.
If you was to put them in a blender first and make them into a fine paste I think you would need only 6
that is mean, and not funny
sicko
1 big b*****d lol...............
hehehehe i like it lol
im not even going to say anything :(
the problem is, it only works if you like red.
RUDE!!!!!!!!!
I would need a better estimation of the square footage of the house. And of course the size of the babies being used. It is actually quite easy to figure out though. Her is how you can figure this out for yourself Barney style.
1: Take the sizes of the walls and multiply by the number of the walls being measured.
2: Take the number of babies used and multiply that by the body mass index.
3: Divide number 2 from number 1 and then multiple by 3.
4: Factor in the Beer Factor and add either 6, 12 or 24. Multiple this by either 10, 12 or 16 (oz)
5: Add 3 to 4 and you have the exact number of babies required to paint a house.
Now this is only good for one coat. If you need to do 2 coats then multiply by 2. Don't get confused on the splatter effect like most folks. This formula is the best means. Splatter is too inconsistent.
Hope this helps.
Have a great day
and folks relax. There is no dumb question but the one not asked.
Humor is in the eye of the beholder, kinda like beauty. This is a question asked in jest. Dont like it please move on, kinda like what you should do when you are passing an accident instead of slowing way down and looking !!! Making me late for work !!!
and how old they are....
Women are gay, what is the harm in a little joke, it's not like he/she has a job in house painting....Or does he/she...?
took me 7
You would need to smear them all over in paint and launch them with some kind of catapult. You probably could steal alot of them from a creche and get a few bathtubs of paint.
that just isn't funny.how dare u post such a nasty and cruel question on here.u should be hung for saying that!
lolHow many babies does it take to paint a house? Depends how hard you throw them.?
Depends how fat they are! Obesity rules because then you wont need as many but you'd better be carefull that your house doesnt fall down!How many babies does it take to paint a house? Depends how hard you throw them.?
well done but i would agree age and size would also play a factor if you were gioing to try it.
hahhahahahahahahahaha
we love the sicko's on this site so the rest of you
back to your knitting page
526
You are either an idiot or you're very immature,then again you might be a real sick-o, but You're free to be stupid on line or anywhere else you might be.
If you was to put them in a blender first and make them into a fine paste I think you would need only 6
that is mean, and not funny
sicko
1 big b*****d lol...............
hehehehe i like it lol
im not even going to say anything :(
the problem is, it only works if you like red.
RUDE!!!!!!!!!
I would need a better estimation of the square footage of the house. And of course the size of the babies being used. It is actually quite easy to figure out though. Her is how you can figure this out for yourself Barney style.
1: Take the sizes of the walls and multiply by the number of the walls being measured.
2: Take the number of babies used and multiply that by the body mass index.
3: Divide number 2 from number 1 and then multiple by 3.
4: Factor in the Beer Factor and add either 6, 12 or 24. Multiple this by either 10, 12 or 16 (oz)
5: Add 3 to 4 and you have the exact number of babies required to paint a house.
Now this is only good for one coat. If you need to do 2 coats then multiply by 2. Don't get confused on the splatter effect like most folks. This formula is the best means. Splatter is too inconsistent.
Hope this helps.
Have a great day
and folks relax. There is no dumb question but the one not asked.
Humor is in the eye of the beholder, kinda like beauty. This is a question asked in jest. Dont like it please move on, kinda like what you should do when you are passing an accident instead of slowing way down and looking !!! Making me late for work !!!
and how old they are....
Women are gay, what is the harm in a little joke, it's not like he/she has a job in house painting....Or does he/she...?
took me 7
You would need to smear them all over in paint and launch them with some kind of catapult. You probably could steal alot of them from a creche and get a few bathtubs of paint.
that just isn't funny.how dare u post such a nasty and cruel question on here.u should be hung for saying that!
Is it hard to put flake in my clear coat when i paint it and how much should i pay to have it done.?
and what flake will go good with a sliver color car? thankIs it hard to put flake in my clear coat when i paint it and how much should i pay to have it done.?
As far as putting the metal flake in the clear, that is not hard at all. You can either use a midcoat clear (recommended) or simply add it to a coat of your topcoat clear. Since the car in question is silver, it is already a metallic color. Typically, metal flakes look better applied to solid colors. A metal flake over silver may not show up very well, or it could look ';dirty';. However, if you used a rainbow flake, it may look okay. PPG makes a really nice rainbow flake that is really fine, almost like pearl. It is called Prizmatique. House of Kolor also makes some really nice metal flakes of different colors and sizes. As far as price, are you talking about the price to have it painted, or the price of the metal flake? Metal flake prices can range greatly depending on the brand. It also depends on how the store will sell it to you. Some places may sell it by the ounce and some places you'll have no choice but to purchase a whole bottle/jar. The clearcoat prices also range greatly by brand and grade. The cost of having a bodyshop painting it for you will also range in price depending on the quality of the work. I would suggest asking around to find out who does the best custom work in your area. In general, a great paint job is going to cost you! It isn't going to be cheap, you get what you pay for. But, if you feel the price is unreasonable or out of your price range, go to another shop. Get some estimates, and look at chip books. If a shop does primarily custom work, they may have their own mixing system and could have metal flakes and clears there to use. This may save you some money because you only have to purchase what you need. Plus, they will be able to give you better advice about metal flakes and which to use. If the finish on the car is in good shape, it won't take long or cost a fortune to have it cleared. Is the car already silver? And is it a factory finish? What kind of car or you working with? Hope this helps! :)Is it hard to put flake in my clear coat when i paint it and how much should i pay to have it done.?
Silver is a hard color to paint. It ';tiger stripes'; so you have to make sure you cross the spray pattern when you spray it. That said, your paint supplier can tell you the type, and amount of flake that will work best for your color and clear coat combination. A good trick is to put a marble or ball bearing (make sure they are clean) in your paint cup. This will help keep your flake particles suspended in your cup and give you even coverage. Practice on something other than your car before you spray your car. then you'll see what the paint will do to you as well as for you. Make sure you ware a mask, and have good ventilation and dust control.
As far as putting the metal flake in the clear, that is not hard at all. You can either use a midcoat clear (recommended) or simply add it to a coat of your topcoat clear. Since the car in question is silver, it is already a metallic color. Typically, metal flakes look better applied to solid colors. A metal flake over silver may not show up very well, or it could look ';dirty';. However, if you used a rainbow flake, it may look okay. PPG makes a really nice rainbow flake that is really fine, almost like pearl. It is called Prizmatique. House of Kolor also makes some really nice metal flakes of different colors and sizes. As far as price, are you talking about the price to have it painted, or the price of the metal flake? Metal flake prices can range greatly depending on the brand. It also depends on how the store will sell it to you. Some places may sell it by the ounce and some places you'll have no choice but to purchase a whole bottle/jar. The clearcoat prices also range greatly by brand and grade. The cost of having a bodyshop painting it for you will also range in price depending on the quality of the work. I would suggest asking around to find out who does the best custom work in your area. In general, a great paint job is going to cost you! It isn't going to be cheap, you get what you pay for. But, if you feel the price is unreasonable or out of your price range, go to another shop. Get some estimates, and look at chip books. If a shop does primarily custom work, they may have their own mixing system and could have metal flakes and clears there to use. This may save you some money because you only have to purchase what you need. Plus, they will be able to give you better advice about metal flakes and which to use. If the finish on the car is in good shape, it won't take long or cost a fortune to have it cleared. Is the car already silver? And is it a factory finish? What kind of car or you working with? Hope this helps! :)Is it hard to put flake in my clear coat when i paint it and how much should i pay to have it done.?
Silver is a hard color to paint. It ';tiger stripes'; so you have to make sure you cross the spray pattern when you spray it. That said, your paint supplier can tell you the type, and amount of flake that will work best for your color and clear coat combination. A good trick is to put a marble or ball bearing (make sure they are clean) in your paint cup. This will help keep your flake particles suspended in your cup and give you even coverage. Practice on something other than your car before you spray your car. then you'll see what the paint will do to you as well as for you. Make sure you ware a mask, and have good ventilation and dust control.
How do i make a drawing from the ';paint'; program to be my display picture?
You mean as your desktop background? You would save the picture as a .jpg, right click it and click set as backgroundHow do i make a drawing from the ';paint'; program to be my display picture?
you have to save it as a jpeg to do this go to save as and there were you can type stuff in to name it, on the side there is an arrow on the scroll down list there will be jpeg save it in this format, then upload it. hope this helps :)How do i make a drawing from the ';paint'; program to be my display picture?
your obviously 12 right..
go bed
On Paint Open What You want click save as make a funky easy to remeber name go to where it says browse picture on yahoo answers then search that pic in your files and click open and it will set it. hope it helps
Make the drawing in paint. Save as and then upload =]
Save the file to your my documents. Right click it select Set as Desktop Background
you have to save it as a jpeg to do this go to save as and there were you can type stuff in to name it, on the side there is an arrow on the scroll down list there will be jpeg save it in this format, then upload it. hope this helps :)How do i make a drawing from the ';paint'; program to be my display picture?
your obviously 12 right..
go bed
On Paint Open What You want click save as make a funky easy to remeber name go to where it says browse picture on yahoo answers then search that pic in your files and click open and it will set it. hope it helps
Make the drawing in paint. Save as and then upload =]
Save the file to your my documents. Right click it select Set as Desktop Background
What is aux-in system in car stereo & how it works and also how to protect car's paint from scratches?
Aux is where you plug in your I-pod, at least on my car.
Wax, good quality wax, every six month or less. Also be careful to rinse all loose dirt and mud off before washing. Or find a good no-touch car wash. Deionized water to rinse is best if they offer it at the car wash. Park in a garage or coverd car port.
Wax, good quality wax, every six month or less. Also be careful to rinse all loose dirt and mud off before washing. Or find a good no-touch car wash. Deionized water to rinse is best if they offer it at the car wash. Park in a garage or coverd car port.
Subscribe to:
Posts (Atom)